used in any applications where round pin or screw pin shackles are used.
| |
| | BoltType Anchor shackles with thin head bolt - nut with cotter pin. Meets the performance requirements of Federal Specifications RR-C-271D Type IVA, Grade A Class 3, except for those provisions required of the contractor. |
|
| |
| | Working Load Limit permanently shown on every shackle.Capacities 1/3 thru 150 metric tons. |
|
| |
| | Forged Quenched and Tempered, with alloy pins. |
|
| |
| | Hot Dip galvanized or Self Colored. |
|
| |
|
| |
| | The products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, the products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B20.26. |
|
| |
| | Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at the time of order. |
|
| |
| | NOTE:Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading applications. |
|
bolt type anchor shackle
